Safe operation matters 1. After the power of the Creasing Machine is turned on, you should first press the "Start" button, and then press the "Cut" button after the speed of the flywheel stabilizes. 2...
The creasing machine has all-steel upper and lower indentation molds, which are durable. Clear marks can be produced for coated paper, kraft paper, or photo paper, which is not as often replaced as ru...
The overall structure of the automatic flat-bed die-cutting and creasing machine is similar to that of a sheet-fed offset printing machine. The whole machine is composed of three parts: the paper feed...
Matters needing attention for printing machine 1. Ensure that the leader is responsible for supervising the safety of equipment and crew operators. 2. Before the operation, the operator must wear work...
The operation of the ready-to-coat Laminating Machine includes three parts: gluing, drying, and hot pressing. The operation is higher. The advantage is that the quality of the finished product is reli...
Laminating is coating a plastic film with an adhesive, and then combining it with the printed matter with paper as the substrate, pressurized by a blanket cylinder and a heating cylinder, to form a pa...